STE110 Series Semiconductor C-V Characteristic Analyzer

CurrentHome>General Electronic Test Equipments

STE110 Series Semiconductor C-V Characteristic Analyzer

Overview Specifications Ordering Resources

STE110 series Semiconductor C-V Characteristic Analyzer adopts an integrated design, diode, transistor, MOS tube and IGBT semiconductor power devices such as parasitic capacitance, CV characteristics can be tested with one key, without frequent switching wiring and setting parameters, single tube power devices and module power devices can be quickly tested with one key, suitable for rapid production line testing, automatic integration.

CV curve scanning analysis capability can also meet the laboratory research and development of semiconductor materials and power devices and analysis.

The design frequency of the instrument is 1kHz-2MHz, the VGS voltage is up to ±40V, and the VDS voltage is up to ±200V/±1500V/±3000V, which is sufficient to meet most power device tests.

** Standard Lead Time: within 4 weeks **

Key Features

Dual CPU architecture , the fastest test speed of 0.56ms

Four parasitic parameters (Ciss, Coss, Crss, Rg) are measured and displayed on the same screen

Integrated design: LCR + high voltage source + channel switching

High Bias: VGS: 0 - ±40V, VDS: 0 - 200V/1500V/3000V

Standard 2-channel test, which can test two devices or dual-chip devices at the same time, the channel is the most Up to 6 channels can be expanded, channel parameters are stored separately

Frequency Range	10kHz-2MHz
Basic Accuracy	0.1%
Test Level	Voltage Range: 5mVrms-2Vrms Accuracy: ± (10% x Setting Value+2mV) Resolution: 1mVrms/5mVrms-1Vrms 10mVrms/1Vrms-2Vrms
VGS	Range: 0 – ±40V Accuracy: 1% x Setting Voltage+8mV
VDS	Range: 0 – ±200V/0 – ±1500V/0 – ±3000V Accuracy: 1%×Setting Voltage + 100mV
Output Impedance	100Ω，±2%@1kHz
AD Conversion Time (ms/time)	Fast+: 0.56ms (＞5kHz), Fast: 3.3ms, Middle: 90ms, Slow: 220ms.

Main Machine

Module No.	Item	Description
STE111	Semiconductor C-V Characteristic Analyzer	Frequency range: 10kHz-2MHz, including Test Fixture, Test Extension Cable, STE110 Fixture Control Connecting Cable.
STE112	Semiconductor C-V Characteristic Analyzer	Frequency range: 10kHz-2MHz, including Test Fixture, Test Extension Cable, STE110 Fixture Control Connecting Cable.
STE113	Semiconductor C-V Characteristic Analyzer	Frequency range: 10kHz-2MHz, including Test Fixture, Test Extension Cable, STE110 Fixture Control Connecting Cable.

Document