The basic working mode of the electronic load is CC, CV, CR, CW, CC+CV, CR+CV.
1. Constant Current Mode
In CC mode, the electronic load will sink a current in accordance with the programmed value regardless of the input voltage.
2. Constant Voltage Mode
In CV mode, the electronic load will attempt to sink enough current to control the source voltage to the programmed value.
3. Constant Resistance Mode
In CR mode, the module will sink a current linearly proportional to the input voltage in accordance with the programmed resistance.
4. Constance Power Mode
In CW mode, the electronic load will consume a constant power.
If the load input voltage value increase, the load input current will decrease. Therefore the load power (=V*I) will remain in the power set.
5. Constant Current Shifting into Constant Voltage Mode
In CC+CV mode, the power supply under test can be avoided from the current strike damage.
6. Constant Resistance Shifting into Constant Voltage Mode
In CR+CV mode, the power supply under test can be avoided from the current strike damage.
Saluki’s DC Electronic Load has CC, CV, CR, CW, CC+CV, CR+CV working modes, which can meet your various test requirements.
