LSG006 analog signal source offers 100kHz to 6GHz frequency coverage with 10ms frequency switching speed. It can be used independently or combined with the chassis to form a test system.
Saluki LSG series signal source is the cost-effective choice when you need to balance budget and performance. It provides the signals you will need for radar performance evaluation, high-performance receiver test and components parameter test etc..
Frequency range from 100 kHz to 6 GHz
Frequency resolution: 2Hz
Harmonic (clutter) suppression: better than 30dBc (60dBc)
Amplitude dynamic range from -50dBm to +10dBm
Pulse and FM modulation method
USB control, independent application
Ultra-portability (volume 135.5×43×16mm, weight ≤200g), easy to carry
Can be used independently or combined with the chassis to form a test system
• Convenient and Easy: modular design+PC software
• Quick Combination: miniature chassis + integrated software
• High Performance: benchmarking Keysight performance
• Stable and Reliable: rigorous test + statistical analysis
• Customer Value: cost-effective + high efficiency
• R&D Technology: calibration test + LO technology + signal processing + channel technology
| Frequency Range | 100 kHz to 6 GHz |
| Frequency Resolution | 2Hz |
| Frequency Switching Speed | ≤ 10ms (typ.) |
| Temperature Stability | ≤ 1 ppm/year (typ.) |
| Sweep Mode | Continuous mode |
| Sweep Points | 2 to 65535 |
| Dwell Time | 10ms to 999ms |
| Trigger Mode | Internal |
| Output Power Range | -50dBm to +10dBm |
| SSB Phase Noise (CW Mode) | -115dBc/Hz @ 10kHz, 1GHz |
| Harmonic Suppression | • +10dBm output power: ≤ -15dBc • 0dBm output power: ≤ -30dBc |
| Analog Modulation | FM, Pulse |
| Remote Programming Interface | USB 2.0 |
| Power Supply | +5VDC ± 5%, current ≤500 |
| Dimension | 135.5 (W) × 16 (H) × 43 (D) mm |
| Weight | ≤ 200g |
(Note: see more detail information in the ‘Resource’ – ‘Datasheet’) |
| Module No. | Item | Description |
| LSG006 | Analog Signal Source | 100 kHz to 6 GHz |
