This section mainly showed the basic function and specification comparison between Saluki S5700A Field Communication Analyzer and JDSU CellAdvisor JD745A Base Station Analyzer.
Saluki S5700 Series Field Comm Analyzer combines the highest performance operating specifications and multi-functional measurements such as cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.
JDSU JD745A CellAdvisor™ Base Station Analyzer is the test tool for installingand maintaining cell sites. It contains the features and capabilities required for field testing cell sites for 2G to 4G wireless technologies.
Table 1 Basic Function Comparison table between Saluki S5700A and JDSU JD745A
| Brand | Saluki | JDSU |
| Model No. |
S5700A | JD745A |
| Cable&Antenna Analyzer | Yes | Yes |
| Spectrum Analyzer | Yes | Yes |
| Transmission Measurement | Yes | Yes |
| Bias Tee | External | Internal |
| Interference Analyzer | Yes | Yes |
| Interference Location | Yes | Yes |
| Channel Scanner | Yes | Yes |
| Coverage Mapping | Yes | Yes |
| 2G Signal Analyzer | Yes | Yes |
| 3G Signal Analyzer | Yes | Yes |
| 4G Signal Analyzer | Yes | Yes |
| WiMAX | No | Yes |
| CPRI | No | Yes |
| CW Signal Generator | Yes | Yes |
| AM/FM Analyzer | Yes | Yes |
| Terminal Power Meter | Yes | Yes |
| Inline Power Meter | Yes | Yes |
| Optical Power Meter | Yes | Yes |
| Optical Microscope | Yes | Yes |
| VFL | Yes | No |
| Built-in GPS | Yes | Yes |
Table 2 SA specification comparison table between Saluki S5700A and JDSU JD745A
| Spectrum Analyzer Parameters | ||
| Model No. | S5700A | JD745A |
| Frequency Range | 9kHz to 4.4GHz | 100kHz to 4GHz |
| Tuning Resolution | 1Hz | 1Hz |
| Frequency Reference | Aging: ±1.0ppm/year
Accuracy:±1.5ppm (0-50℃) +aging <±50ppb (GPS ON) |
Aging: ±0.5ppm/year
Accuracy:±0.05ppm (0~50℃) +aging <±50ppb (GPS ON) |
| Sweep Time | Minimum 20ms,1ms (Fast mode)
10us to 1000s in zero span |
Minimum 80ms,
24us to 200s in zero span |
| RBW | 1Hz to 3MHz in 1-3 sequence | 1Hz to 3MHz in 1-3 sequence |
| VBW | 1Hz to 3MHz in 1-3 sequence | 1Hz to 3MHz in 1-3 sequence |
| Phase Noise | -105 dBc/Hz typ. @10 kHz offset@1GHz | –100dBc/Hz,–102dBc/Hz TYP. @ 30 kHz offset |
| Dynamic Range @RBW=1Hz | 1GHz to 3.0GHz: 102 dB | 104dB @2GHz |
| Measurement Range | DANL to +12dBm | DANL to +25dBm |
| DANL (RBW=1Hz) | Preamp Off:
2 MHz to 1GHz: -148dBm 1GHz to 3.0GHz: -142dBm 3GHz to 6GHz: -143dBm Preamp On: 10 MHz to 1GHz: -165dBm 1GHz to 3.0GHz: -160dBm 3GHz to 6GHz: -158dBm |
Preamp Off:
10 MHz to 3 GHz: -140dBm 3 GHz to 5 GHz: -138dBm 5 GHz to 7 GHz: -135dBm 7 GHz to 8 GHz: -132dBm Preamp On: 10 MHz to 3 GHz: -160dBm 3 GHz to 5 GHz: -158dBm 5 GHz to 7 GHz: -155dBm 7 GHz to 8 GHz: -152dBm |
| Attenuator Range | 0 to 55dB in 5dB steps | 0 to 50dB/55dB in 5dB steps |
| Amplitude Accuracy | ±1.5dB, ±1.0dB typ. | 1M to 4GHz: ±1.3dB |
| Spurs | Residual <-80dBm | Residual <-90dBm |
| VSWR | 10MHz to 3000MHz: 1.8 typ.
3GHz to 6GHz: 2.0 typ. |
1M to 4GHz: 1.5:1 |
Table 3 CA specification comparison table between Saluki S5700A and JDSU JD745A
| Cable and Antenna Parameters | ||
| Model No. | S5700A | JD745A |
| Frequency Range | 2MHz-4.4GHz | 5MHz-4GHz |
| Frequency Resolution | 1Hz | 10kHz |
| Frequency Accuracy | ≤ ±2ppm@25℃ | ≤ ±2.5ppm@25℃ |
| Output Power Level | High : 0dBm, Low: -30dBm | High : 0dBm, Low: -30dBm |
| Sweep Speed | ≤0.8msec/point
≤1.0msec/point(DTF) |
1.0msec/point
1.25msec/point |
| Points | 130, 259, 517, 1033, 2065 | / |
| RF Immunity | +10dBm on Frequency
+25dBm On Channel |
0dBm on Frequency
+17dBm On Channel |
| Directivity | 42dB(OSL Calibration)
38dB(E-CAL Calibration) |
40dB(OSL Calibration) |
| DTF Length | 1500m | 1500m |
Table 4 General information comparison table between Saluki S5700A and JDSU JD745A
| Model No. | S5700A | JD745A |
| Markers | 8 | 8 |
| Internal Setup Memory | 2000 Setups | 200 Setups |
| Internal Trace Memory | 2000 Traces | 200 Traces |
| Internal Screen Memory | 2000 Screens | 200 Screens |
| Battery Operation | Spectrum Mode: 4 hours, Cable Mode: 6 hours | 3 hours |
| Display | 8.4″ inch color LCD resistive touch screen | 8″ daylight viewable color LCD |
| Size | 280mm × 220mm × 90mm | 295 mm × 195 mm × 82 mm |
| Weight | 3.37 kg | 4.4kg |
