LSG022 analog signal generator offers 100kHz to 22GHz frequency coverage with 10ms frequency switching speed. It can be used independently or combined with the chassis to form a test system.
Saluki LSG series signal source is the cost-effective choice when you need to balance budget and performance. It provides the signals you will need for radar performance evaluation, high-performance receiver test and components parameter test etc..
Frequency range from 100 kHz to 22 GHz
Frequency resolution: 0.1Hz
Harmonic (clutter) suppression: better than 45dBc (65dBc)
Amplitude dynamic range from -65dBm to +15dBm
Pulse and FM modulation method
USB control, independent application
Small size 175×150×21 mm, easy to carry
Can be used independently or combined with the chassis to form a test system
• Output frequency: 100 kHz – 22 GHz
• Frequency resolution: 0.1 Hz
• Harmonic (clutter) suppression: better than 45 (65) dBc
• Amplitude dynamic range: -65 to +15 dBm
• Absolute amplitude accuracy: ±1 dB (±0.5 dB, 95%)
• Amplitude resolution: 0.5 dB
• Modulation method: pulse/chirp
• Phase noise: -105@10kHz, 10GHz
LSG022 USB signal generator provides the signals you will need for radar performance evaluation, high-performance receiver test and components parameter test etc..
• Convenient and Easy: modular design+PC software
• Quick Combination: miniature chassis + integrated software
• High Performance: benchmarking Keysight performance
• Stable and Reliable: rigorous test + statistical analysis
• Customer Value: cost-effective + high efficiency
• R&D Technology: calibration test + LO technology + signal processing + channel technology
| Frequency Range | 100 kHz to 22 GHz |
| Frequency Resolution | 0.1Hz |
| Frequency Switching Speed | 10ms (CW mode) |
| Temperature Stability | ≤ ±1 ppm/year |
| Internal Reference Output | 10MHz, ≥ +4dBm ( nominal into 50Ω load) |
| External Reference Output | 10MHz, Sine |
| Sweep Mode | Step sweep, List sweep |
| Dwell Time | 1ms to 100s |
| Trigger Mode | Free run, External, Timer, Bus (USB) |
| Output Power Range | -65dBm to +15dBm |
| Output Power Resolution | 0.5dB |
| VSWR (CW Mode) | • 100kHz – 6GHz: <1.9:1 • 6GHz – 9GHz: <1.7:1 • 9GHz – 15GHz: <2:1 • 15GHz – 20GHz: <2:1 |
| SSB Phase Noise (CW Mode) | -104dBc/Hz @ 10kHz, 10GHz |
| Harmonic (CW Mode) | • 100kHz – 300MHz: ≤ -30dBc • 300MHz – 6GHz: ≤ -35dBc • 6GHz – 15GHz: ≤ -45dBc • 15GHz – 20GHz: ≤ -55dBc |
| Non-Harmonic (CW Mode) | ≤ -60 dBc (full range, >90% frequency points) |
| Sub-Harmonic (CW Mode) | • 100kHz – 15GHz: ≤ -70dBc • 15GHz – 20GHz: ≤ -60dBc |
| Analog Modulation | FM, Pulse, Narrow pulse, Internal pulse generator |
| RF Output Connector | SMA (female), 50Ω nominal |
| Remote Programming Interface | USB 2.0 |
| Power Supply | 12 VDC, maximum 15 watts |
| Dimension | 159 (W) × 37 (H) × 190 (D) mm (with rubber gaskets) |
| Weight | ≤ 800g |
(Note: see more detail information in the ‘Resource’ – ‘Datasheet’) |
| Module No. | Item | Description |
| LSG022 | Analog Signal Generator | 100 kHz to 22 GHz |
