Saluki S81510F programmable step attenuator can realize 0-11dB step attenuation in dc to 40GHz wide band range. The attenuator is characterized by high attenuation accuracy, good repeatability, low insertion loss, long service life.
| Frequency range: DC to 40GHz
| Connector type: 2.4mm female
| Insertion loss: <4.1dB (in case of 0dB)
| Repeatability life: <0.05dB (typical value)
| 2 million cycles per section
| Maximum RF input power: 1W (continous wave)
| RF measurement instruments
| Microwave automatic test systems
| Wireless communication systems
Unit Price: $1,430
The S81510F programmable step attenuator can realize 0-11dB step attenuation in DC-40GHz wide band range, and the minimum step size is 1dB. The programmable step attenuator is characterized by high attenuation accuracy, good repeatability, low insertion loss, long service life, etc., which is mainly applied to control signal level amplitude entering the system, control system output signal power, adjust matching between the signal source and load, and simulate the loss of signal transmission channel in the communication system. It is widely used in the broadband spectrum analyzers, broadband vector network analyzers, broadband synthesis signal sources, noise factor testers and microwave automatic test systems and wireless communications systems.
|Frequency range||DC - 40GHz||Attenuation size||11dB|
|Step size||1dB||Connector Type||2.4mm female|
|Port standing wave ratio||<= 2.0||Insertion loss||<= 4.1dB (in case of 0dB)|
|Attenuation accuracy||±1.0 @ attenuation size 1 or 2||±1.5 @ attenuation size 4||±2.0 @ attenuation size 11|
|Repeatablity||<= 0.05dB (typ.)||Maximum input power||1W (continuous wave)|
|Minimum service life||2 million times per section||Impact||10g, 6ms|
|Operation temperature||-20°C to +70°C||Srorage temperature||-55°C to +85°C|
|Weight||0.35kg (max.)||Switching speed||20ms (max.)|
NOTE: More modules of programmble step attenuator, please send email to email@example.com.