S3302 Handheld Spectrum Analyzer (up to 44GHz)

The S3302 series Spectrum Analyzer has a wide frequency range, high performance, fast scanning speed, multi-function tests, easy operation and other advantages.

Key Features
  • Wide frequency range from 9kHz to 44 GHz.
  • Low DANL level to -163 dBm @ 1 Hz RBW.
  • Excellent phase noise performance.
  • Fast scanning speed.
  • A variety of measurement functions.
  • Flexible interfaces and friendly UI.
Applications
  • Spectrum analysis.
  • Field strength measurement.
  • Interference analysis.
  • Analog demodulation.



The S3302 series Spectrum Analyzer has a wide frequency range, high performance, fast scanning speed, multi-function tests, easy operation and other advantages.

This responsive spectrum analyzer is widely used on site and applied to signal and equipment test in aerospace, microwave, satellite communications and wireless communications.






Technical Specifications
Frequency Range
S3302A
9 kHz - 20 GHz
S3302B
9 kHz - 26.5 GHz
S3302C
9 kHz - 32 GHz
S3302D
9 kHz - 44 GHz
Bandwidth
Resolution Bandwidth
1 Hz - 10 MHz (step by 1-3)
Video Bandwidth
1 Hz - 10 MHz (step by 1-3)
Phase Noise
@1GHz, 10 kHz offset
<-102 dBc/Hz  
@1GHz, 100 kHz offset
<-106 dBc/Hz
@1GHz, 1 MHz offset
<-111 dBc/Hz dBc / Hz  
Residual Response
10 MHz -13 GHz, preamplifier off
<-90 dBm
13 GHz -20 GHz, preamplifier off
<-85 dBm
20G Hz -44 GHz, preamplifier off
<-80 dBm
Displayed Average Noise Level (DANL)
10 MHz - 4 GHz
≤-138 dBm (Pre-amplifier on)
 
≤-157dBm  (Pre-amplifier off)
4 GHz - 6 GHz
≤-135 dBm (Pre-amplifier on)
 
≤-152 dBm  (Pre-amplifier off)
6 GHz - 20 GHz
≤-138dBm (Pre-amplifier on)
 
≤-157dBm (Pre-amplifier off)
20 GHz - 32 GHz
≤-135d Bm  (Pre-amplifier on)
 
≤-154 dBm  (Pre-amplifier off)
32 GHz - 44 GHz
≤-127 dBm (Pre-amplifier on)
 
≤-148 dBm  (Pre-amplifier off)
Second-order Harmonic Distortion
10MHz - 18GHz
<60 dBc
Sweep Time
Zero-span
10 μs - 600 s

General Information

Dimension

314 (W) × 218 (H) × 91 (D) mm

(without the handle, brackets)

 

338 (w) × 218 (H) × 100 (D) mm

Weight

<5kg

Battery Life

2.5 h

Input Interface

S3302A / B: N-type

 

S3302C / D: 2.4 mm (M)


Software
01 Programming Manual
07 USB Power Measurement Option USB interface power measurement 
(USB power sensors need to be purchase separately )
12 Interference Analysis Option Provide waterfall, RSSI measurement functions
13 Analog Demodulation Option Implement AM / FM / PM signal modulation characteristics analysis
14 Channel Scan Option Implementing multiple channel or frequency signal power measurements
15 List Sweep Function Option Continuous scanning measurement multi- frequency bands
16 Zero Span IF Output IF signal output from the third or fourth intermediate frequency signal (one option available out of two)

Hard Ware
08 SAV87230 USB Power Continuous Wave Probe 9kHz - 6GHz Power Sensors
09 SAV87231 USB Power Continuous Wave Probe 10MHz - 18GHz Power Sensors
10 SAV87232 USB Power Continuous Wave Probe 50MHz - 26.5GHz power sensor
11 SAV87233 USB Power Continuous Wave Probe 50MHz - 40GHz Power Sensors

Accessories
03 Rechargeable lithium-ion battery /
04 Purple UTP cable Point to Point, 2 m length
05 Micro SD card Class4, 8G capacity
06 GPS External Antenna /
17 SAV89101A Antenna Frequency range: 10kHz - 20MHz (should work with optional S3302-21 )
18 SAV89101B Antenna Frequency range: 20MHz - 200MHz (should work with optional S3302-21 )
19 SAV89101C Antenna Frequency range: 200MHz - 500MHz (should work with optional S3302-21 )
20 SAV89101D Antenna Frequency range: 500MHz - 4GHz (should work with optional S3302-21 )
21 SAV89401 Antenna Amplifier Frequency range: 10kHz - 4GHz, N (f) (should work with optional 17, 18, 19 or 20)
22 SAV89901 Antenna Frequency Range: 1GHz - 18GHz, N (f)
23 SAV89902 Antenna Frequency range: 18GHz - 40GHz, 2.4mm (f)






  No.367 Fuxing N road, Taipei 105, Taiwan       +886. 0909 602 109       sales@salukitec.com

              

Copyright © Saluki Technology All rights reserved.